RTTNA 70th Anniversary Logo

REMA TIP TOP/North America, Inc.

Buffing Tools

Air buffers and high speed grinders

Air Buffers and High Speed Grinders

REMA TIP TOP's exceptional quality, durable low speed (less than 5,000 rpm) Air buffer, and high speed grinders (greater than 20,000 rpm) are the right choice for injury and surface preparation. These low speed buffers are equipped with a quick release chuck and rear exhaust system. The high speed grinder is equipped with a 1/4" Jacob's Chuck.

Part No. Description RPM Box/Qty
CP-871 High Speed Grinder, Jacob’s chuck 22,000 1
RTT-SSB REMA TIP TOP Low Speed Tire Buffer 2,800 1

Quick release air buffer hardware (slow-speed)

Quick Release Air Buffer Hardware

Designed for use with REMA TIP TOP slow-speed air buffers; quick-release couplers, arbors and adapters provide optimal versatility when changing tools.

  • Tested-tough and performance-proven.
Part No. Description Box/Qty Case/Qty
6053 Arbor, fixed, for use with 6057 rotary brush, 1/4" 10
6060 QR chuck set, 2 QR arbors 1 10
6062 Jacobs chuck, 3/8" 1
6065 Accessory kit: (One each: 6066 QR arbor, 6067 QR arbor, 6068 QR adapter, 6069 QR adapter) 1
6066 QR arbor, 2-1/4" threaded, 3/8" x 24-T 1 10
6067 QR arbor, 2-1/4" threaded (w/sleeve), 3/8" x 24-T 1 10
6068-125 QR adapter, 1/8" shank, for use with CC-3 1 10
6068 QR adapter, 1/4" shank, for use with CC-4.5, CC-6 1 10
6069 QR adapter, 5/16" shank, for use with CC-8 1 10
5196593 QR adapter, 3/8" shank, for use with CC-10 1 10
77 Pneumatic tool lubricant, 16 fl. oz. can 1 12

Rubberhog flared contour wheels

Rubberhog Flared Contour Wheel

Precision contoured wheels deliver efficient texturing results without gouging rubber surfaces.

Part No. Description Dia. (inch) Width (inch) Bore (inch) SSG Grit Box/Qty
RH-100 Flared contour wheel 1-3/4 3/4 3/8 170 60 1
RH-102 Flared contour wheel 1-3/4 3/4 3/8 230 36 1
RH-107 Flared contour wheel 2-1/2 1-1/16 3/8 170 60 1
RH-109 Flared contour wheel 2-1/2 1-1/16 3/8 230 36 1
RH-111 Flared contour wheel 2-1/2 1-1/16 3/8 390 16 1
RH-114 Flared contour wheel 3 1-1/4 3/8 230 36 1
RH-116 Flared contour wheel 3 1-1/4 3/8 390 16 1
RH-120 Flared contour wheel 3-1/2 1-1/2 3/8 230 1
RH-122 Flared contour wheel 3-1/2 1-1/2 3/8 390 16 1
RH-129 Flared contour wheel 4 1-1/2 3/4 390 16 1
RH-130 Flared contour wheel mini- cup 2 3/4 3/8 170 60 1

Rubberhog Polyplugs for flared contour wheels

Rubberhog Polyplugs for Flared Contour Wheel

When used with the corresponding contour wheel, Polyplugs provide a flywheel effect that results in better control when preparing repair surfaces. (Use with the appropriate safety and eye protection.)

Part No. Description Dia. (inch) Bore (inch) Box/Qty
RH-150 Polyplug 1-3/4 3/8 1
RH-152 Polyplug 2-1/2 3/8 1
RH-154 Polyplug 3 3/8 1
RH-156 Polyplug 3-1/2 3/8 1

Rubberhog round face buzzout wheels

Rubberhog Round Face Buzzout Wheels

Specifically designed for skiving and texturing of large exterior section repairs. (Use with appropriate safety and eye protection.)

Part No. Description Dia. (inch) Width (inch) Bore (inch) SSG Grit Box/Qty
RH-302 Buzzout wheel, round face 2 1/4 3/8, 24-THRD 390 16 1
RH-306 Buzzout wheel, round face 2 3/8 3/8, 24-THRD 390 16 1
RH-308 Buzzout wheel, round face 2 1/2 3/8, 24-THRD 230 36 1
RH-310 Buzzout wheel, round face 2 1/2 3/8, 24-THRD 390 16 1

Rubberhog tapered cones

Rubberhog Tapered Cones

Designed for skiving and texturing of smaller exterior section repairs, also utilized on smaller buzzout repair. Use with tools not to exceed 5000rpm. (Use with appropriate safety and eye protection.)

Part No. Description Dia. (inch) Width (inch) Bore (inch) SSG Grit Box/Qty
RH-611 Tapered Cone, 1/4" shank 1 5/8 3/8, 24-THRD 330 24 1
RH-613 Tapered Cone, 1/4" shank 1-1/4 7/8 3/8, 24-THRD 330 24 1

Rubberhog balls

Rubberhog Balls

Designed for skiving and texturing of smaller exterior section repairs, also utilized on smaller buzzout repair. Use with tools not to exceed 5000rpm. (Use with appropriate safety and eye protection.)

Part No. Description Dia. (inch) Bore (inch) SSG Grit Box/Qty
RH-601 Ball, 1/4" shank 5/8 1/4 330 24 1
RH-603 Ball, 1/4" shank 7/8 1/4 330 24 1

Rubberhog nail hole reamers

Rubberhog Nail Hole Reamers

Designed for plug repairs on fabric tires only. Use with tools not to exceed 5000 rpm. (Use with appropriate safety and eye protection.)

Part No. Description Dia. (inch) Width (inch) Bore (inch) SSG Grit Box/Qty
RH-625 Nail hole reamer 1/4 3 1/4 230 36 1
RH-626 Nail hole reamer 1/4 3 1/4 330 24 1

Rubberhog rotor saws

Rubberhog Rotor Saws

Designed for skiving and texturing of smaller exterior section repairs, also utilized on smaller buzzout repair. (Use with appropriate safety and eye protection.)

Part No. Description Dia. (inch) Bore (inch) SSG Grit Box/Qty
RH-619 Rotor Saw 1-3/8 1/4 330 24 1

Rubberhog donut wheels

Rubberhog Donut Wheels

Designed for Maragoni, Collman, and other sidewall buffers. (Use with appropriate safety and eye protection.)

Part No. Description Dia. (inch) Width (inch) Bore (inch) SSG Grit Box/Qty
RH-708 Donut wheel 6 1 11/2 390 16 1

Rotary gouges

Rotary Gouges

Rotary gouges provide provide fast, bulk removal of rubber and are an essential tool for any retread environment. (Use with appropriate safety and eye protection.)

Part No. Description Dia. (inch) Arbor Hole (inch) Box/Qty
6425 Rotary gouge, thin wall (notched) 2 1/2 1
6426 Rotary gouge, mini (no notch) 1-1/4 3/8 3

Encapsulated wheels

Encapsulated Wheels

Encapsulation reduces wire fatigue, resulting in longer brush life and increased operator efficiency. Encapsulation produces increased brushing action with minimal brushing pressure.

Part No. Description Dia. (inch) Max rpm Box/Qty
6055 Encapsulated wire brush 2 5000 1
6056 Encapsulated wire brush 3 5000 1

Rotary wire brush

Rotary Wire Brush

Heavy-duty, stiff steel wires.

Part No. Description Dia. (inch) Max rpm Box/Qty
6057 Rotary wire brush 3 5000 1